Herunterladen Inhalt Inhalt Diese Seite drucken

Noise/Vibration Information; Rechargeable Battery; Inserting The Battery; Battery Charge Indicator - Bosch EasySpray 18V-100 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
20 | English
Fine-spray system
varnishes, primers, clear lac-
quers and oils
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– During charging
A)
– During operation
and dur-
ing storage
Recommended rechargeable
batteries
Recommended battery char-
B)
gers
A) Limited performance at temperatures < 10 °C
B) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Technical data determined using the battery that comes with the
product.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-1:
2
2
a
 < 2.5 m/s
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
1 609 92A 6FW | (13.12.2021)
EasySpray 18V-100

Rechargeable battery

Charging the battery
m
1.25
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
kg
2.1
your power tool.
(1.5 Ah) to 2.5
Note: Lithium-ion rechargeable batteries are supplied par-
(6.0 Ah)
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
°C
0 to +35
charge the rechargeable battery before using your tool for
°C
–20 to +50
the first time.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
PBA 18V...W-.
can be damaged.
AL 18...

Inserting the Battery

Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.

Battery charge indicator

The battery charge indicator indicates the remaining battery
capacity or an overload for a few seconds when the power
tool is switched on.
LED
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × flashing green light
3 × flashing green light
The three LEDs in the battery charge indicator flash quickly
when the temperature of the rechargeable battery is outside
the operating temperature range and/or the overload protec-
tion has been triggered.
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50 °C. Do not leave the battery in your car in the summer, for
example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Capacity
67–100 %
34–66 %
11–33%
1–10 %
0 %
Bosch Power Tools

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

06032072003 603 b08 0

Inhaltsverzeichnis