Technical Data; Noise/Vibration Information - Bosch PFS 1000 Originalbetriebsanleitung

(29) Air filter
a) Available as an accessory for PFS 1000; included in the
scope of delivery for PFS 2000

Technical Data

Fine-spray system
Article number
Rated power input
Spraying capacity
Required time for application of paint on 2 m
Container capacity for spray material
Nozzle cap (9) (grey)
– "Wood" application:
Spraying solvent-based and water-dilutable lacquers, glazes,
primers, clear lacquers and oils
Nozzle cap (10) (white)
– "Wall" application:
Spraying emulsion and latex paints
Length of air hose
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 80 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-1:
2 2
a < 2.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools
b) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
2
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Ensure that the spray gun and base unit are as-
u
sembled completely and with all seals. Only this will en-
sure the function and safety of the fine-spray system.
Connecting the air hose (see figures A1–A2)
Connecting the base unit:
– Insert a bayonet lock (21) of the air hose securely into the
holes in the base unit port (27) according to the arrow
marks.
– Turn the bayonet lock a quarter turn clockwise.
Connecting to the spray gun:
– Insert the second bayonet lock (21) of the air hose se-
curely into the holes in the spray gun port (4) according
to the arrow marks.
– Turn the bayonet lock a quarter turn clockwise.
Note: Remove the air hose (20) before pouring in spray ma-
terial (quarter turn of the bayonet lock (21) anticlockwise;
pull the bayonet lock (21) out of the port (4)).
Attaching the carrying strap (see figure B)
To be able to reach all surfaces to be sprayed and to main-
tain flexibility, you can carry the base unit by means of the
strap (25).
PFS 1000
3 603 B07 0.. 3 603 B07 3..
W 410
ml/min 100
min 2
ml 800
●
–
m 1.25
kg 1.8
/ II
1 609 92A 687 | (16.09.2021)
English | 19
PFS 2000
440
200
1.3
800
●
●
1.25
1.9
/ II