Product Features; Technical Data; Noise/Vibration Information - Bosch PFS 1000 Originalbetriebsanleitung

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Hose port (spray gun)
5 Thumbwheel for spraying capacity
6 Trigger switch
7 Container for spray material
8 Nozzle cap (grey: for a "wood" application)
9 Nozzle cap (white: for a "wall" application)
(PFS 2000)
10 O-ring
11 Gasket
12 Suction tube

Technical Data

Fine-spray System
Article number
Rated power input
Spraying capacity
Required time for application of paint on 2 m
Container capacity for spray material
Nozzle cap 8 (grey)
– "Wood" application:
Spraying solvent-based and water-dilutable lacquers, glazes, primers,
clear lacquers, wood stains and oils
Nozzle cap 9 (white)
– "Wall" application:
Spraying emulsion and latex paints
Length of air hose
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-1, EN 50580.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
2
a <2,5 m/s , K= 1,5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
Bosch Power Tools
Downloaded from www.Manualslib.com
2
(triax vector sum) and uncertainty K
h
2
.
manuals search engine
13 Nozzle needle
14 Container seal
15 Ventilation hole
16 Paint channel
17 Air hose
18 Bayonet lock
19 Base unit
20 On/Off switch
21 Carrying handle
22 Carrying strap
23 Air filter cover
24 Hose connection (base unit)
25 Eyelet for carrying strap
26 Air filter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PFS 1000
3 603 B07 0..
W
ml/min
min
ml
m
kg
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 17
PFS 2000
3 603 B07 3..
410 440
100 200
2 1,3
800 800
 

–
1.25 1.25
2.0 2.0
/II /II
2 609 007 770 | (16.9.14)