Assembly And Adjustments - DeWalt D36000 Bersetzung Der Originalanweisungen

EnGLIsh
Using an Extension Cable
If an extension cable is required, use an approved 3–core extension cable suitable for the
power input of this tool (see Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Portable Residual Current Device
The machine is equipped with a portable residual current device (PRCD), which protects the
user against electric shock by interrupting the circuit when a leakage current of 10mA or
greater is detected.

WARNING: Never operate the machine without the PRCD in place. Do not use the
machine if the PRCD does not function properly. For the PRCD to work, the machine must
be connected to an earthed wall socket. Before using the tile saw, check the function of the
PRCD, pressing the TEST button.
Package Contents
The package contains:
1 Motor arm assembly
1 Saw frame assembly
1 Water basin
1 Water pump
1 Cutting disc
1 Cutting cart
1 Extension table
1 Edge guide
2 Rear water attachments
2 Cutting cart water attachments
1 Splash guard
6 Hex screws
1 Hex key
1 Cutting wheel wrench
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Labels on tool
The following pictographs are shown on the tool.
Read the instruction manual before use.
Do not use recessed cutting discs.
Wear safety goggles.
Always wear regular working gloves while operating this tool.
Always wear ear protection.
WaRnInG! Sharp edges.
On/off switch: position I (on) and 0 (off).
Carrying point
Do not place your hands within this area.
Maximum depth of cut
80 mm
20
25.4 mm
; the
2
Date Code Position (Fig. A)
The date code 22 , which also includes the year of manufacture, is printed into the nameplate.
Example:
Description (Fig. A)

WARNING: Never modify the power tool or any part of it. Damage or personal injury
could result.
On/Off switch
1
Motor arm assembly
2
Plunge handle
3
Head lock knob
4
5 Cutting disc cover
Cutting disc
6
Rubber shroud
7
Small rear water attachment
8
Large rear water attachment
9
10 Splash guard
Cutting cart assembly
11
Intended Use
Your D36000 tile saw has been designed for professional wet tile cutting applications. Using
the appropriate diamond saw blade, diameter 250 mm, it can cut concrete, brick, porcelain
and ceramic materials. Providing optimum versatility, the machine performs the cutting
operations of straight cutting (ripping), diagonal cutting, plunge cutting and bevel cutting
easily, accurately and safely.
This machine is not to be used for any operation other than those mentioned in this manual.
DO nOT use under wet conditions or in the presence of flammable liquids or gases.
DO nOT let children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
• Young children and the infirm. This appliance is not intended for use by young children
or infirm persons without supervision.
• This product is not intended for use by persons (including children) suffering from
diminished physical, sensory or mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their safety. Children should never
be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect tool from power source before making any adjustments or removing/
installing attachments or accessories. An accidental start-up can cause injury.
ASSEMBLY

WARNING: Prior to assembly always unplug the tool.

WARNING: When assembling the machine, always follow the instructions in the order as
described below.
Unpacking the Machine and Its Parts

WARNING: When moving the machine, always seek assistance. The machine is too heavy
for one person to handle.
1. Remove the loose packaging material from the box.
2. Lift the machine parts out of the box.
3. Remove any remaining packing material from the machine parts.
Wrench Storage (Fig. A, B)
Your wet tile saw comes supplied with the two hand tools you will need for assembly. A hex
key and a cutting wheel wrench
24
Motor Arm Assembly (Fig. A, C, D)
1. Place the water basin
2. Place saw frame assembly
nOTE: Make sure the front of the saw frame assembly sits beneath the water basin
bracket to ensure a secure fit (Fig. C).
62
3. Using the supplied hex key
4. Place motor arm assembly
5. Secure the saw head by installing two of the screws
Tighten the screws with the hex key provided. Install the other four screws in the other four
holes and tighten.
Mounting the Cutting Cart Assembly to the Saw Frame Assembly
(Fig. E, F, S)
1. Turn the cutting cart stop knob
Knob) and slide the cutting cart onto the rails.
Cutting disc bore
2020 XX XX
Year and week of Manufacture
Small cutting cart water attachment
12
Large cutting cart water attachment
13
Extension table
14
Water basin
15
16 Saw frame assembly
Water nozzles
17
Cutting cart stop
18
Edge guide
19
Cutting wheel cover screw
20
21 Accessory storage
are stored at the back of the motor arm assembly
25
15 on a flat, stable surface, or on the stand.
16 in the water basin 15 .
24 remove the screws 23 from the saw frame assembly.
on the saw frame assembly (Fig. D).
2
23 into the holes closest to the rail.
into the unlock position (Refer to Cutting Cart Stop
18
.
2