Product Description And Specifications; Intended Use; Product Features - 3M 14253 Originalbetriebsanleitung

ADDITIONAL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cut-
l
ting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

Product Description and Specifications

Read all the safety and general instructions. Failure to observe the safety and general in-
structions may result in electric shock, fire and/or serious injury.
Please observe the illustrations at the beginning of this operating manual.
The power tool is intended for use in industrial locations, and used only by skilled, trained professionals.
The power tool is intended for cutting and roughing of metal and stone materials without the use of wa-
ter.
A separate protective guard for cutting must be used when cutting with bonded abrasives.
Sufficient dust extraction must be provided when cutting stone.
With approved abrasive tools, the power tool can be used for sanding with sanding discs.
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
(4) Speed preselection thumbwheel (14281, 14291)
(5) Auxiliary handle (insulated gripping surface)
(6) Protective guard for cutting
(7) Protective guard for grinding
(8) Mounting flange with O-ring
(9) Carbide grinding head
(10) Grinding disc
(11) Cutting disc
(12) Quick-clamping nut
(13) Clamping nut
(14) Two-pin spanner for clamping nut
(15) Grinding spindle
(16) Handle (insulated gripping surface)
(17) Rubber sanding pad
(18) Abrasive disc
(19) Round nut
a) The accessories illustrated or described are not included as standard delivery.
1 609 92A 6BB • 16.3.21

Product Features

a)
a)
a)
a)
a)
a)
a)
a)

Intended Use

English
English
a)
English
English | 13