Residual Risks - Black & Decker BDCH188 Originalanweisungen

ENGLISH
specified range may damage the battery and
increase the risk of fire.
6. Service
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.
b. Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety Instructions for All Operations
● Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
● Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or the fas-
tener may contact hidden wiring. Cutting
accessory or the fastener contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Safety Instructions When Using Long Drill Bits
● Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if allowed to
rotate freely without contacting the workpiece, result-
ing in personal injury.
● Always start drilling at low speed and
with the bit tip in contact with the
workpiece. At higher speeds, the bit is likely to
bend if allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
● Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of control,
resulting in personal injury.
6
(Original instructions)
Additional Safety Warnings for Drill/ Driver/
Hammerdrill
● Use clamps or other practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and
may lead to loss of control.
● Accessories and tool may get hot during operation.
Wear gloves when handling them if performing heat
producing applications such as drilling metals.
● Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be
caught in moving parts.
● Wear safety goggles or other eye protection. Hammer-
ing and drilling operations cause chips to fly. Flying
particles can cause permanent eye damage.
● Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
● Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
● Do not operate this tool for long periods of time.
Vibration caused by tool action may be harmful to your
hands and arms. Use gloves to provide extra cushion
and limit exposure by taking frequent rest periods.
Safety of others
● This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
● Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.

Residual risks

Additional residual risks may arise when using the tool
which may not be included in the enclosed safety warn-
ings. These risks can arise from misuse, prolonged use
etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include: