Child Lock Function; Overload Protection - HOMCOM 821-018V70 Montageanleitung

6.3 SETTINGS
a.
Dehumidification Mode Setting
Press POWER key to turn on the unit after plug in.
The dehumidifier starts with sunny mode and air purifying function.
Press MODE key repeatedly to switch the mode:
Sunny mode: auto dehumidifying with 60%RH, High fan speed.
•
Rainy mode: auto dehumidifying with 40%RH, high fan speed.
•
Continuous mode: continuous dehumidifying
•
b.
Set Sleep Mode:
Press SLEEP key to turn on sleep function.
It will operate in silent mode with low fan speed and dims all the lights.
Press any button to wake up the indicators.
Press SLEEP key again to exit the sleep mode.
c.
Set Humidity (setting range: 20%-95%):
Press the HUM key to check the humidity set-point under current mode.
Press the HUM key repeatedly to adjust humidity set-point.
Set appropriate humidity levels to create a comfortable environment.
Note: The HUM key cannot be set in the continuous mode.
d. Set Fan Speed:
Press SPEED key to switch the speed between High speed and Low speed.
Note: The fan speed cannot be set when the indicator is off in sleep mode and defrosting
progress.
e. Child Lock Function:
The child lock function is designed to prevent children from playing unit.
To active:
To unlock:
f. Overload Protection
In the event of a power loss, to protect the compressor there is a 3-minute delay until
the compressor restarting.
Long press the SPEED/LOCK key for 5 seconds to disable all the buttons.
Press and hold again to cancel the child lock.
14