Timer Setting - HOMCOM 821-018V70 Montageanleitung

g. Timer Setting
To turn off
(When power on)
To turn on
(When power off)
Cancel the timer
h. Water full indicator:
The machine automatically shuts off once the water tank is full, alerting the user through
an indicator light and buzzing for 15 times.It reminds you to check:
◼ If the water tank is full, empty and re-install the water tank.
◼ If the water tank is not in position, the full indicator always on and the unit is
inoperative.
◼ Re-install the tank correctly, and the unit will auto operating as your last setting.
i. Room Temperature Inspection
In addition to the humidity level, the digital display can also indicate the current room
temperature. Please check as follows:
Press and hold the TIMER button for 5 seconds.
The screen displays the temperature in degree Celsius.
j. Auto defrost function
At low room temperatures, frost may buildup at the evaporator reducing the airflow
across it during dehumidifying.
The unit will automatically start defrosting and the POWER indicator flashing.
When the room temperature below18℃ or the humidity sensor failures, the compressor stops
for 10 minutes during the automatic defrost function and the fan keeps running.
（setting range: 1hour-24hours）:
Press Timerkeyto turn
on the timer function
PressTimerkey to turn
on the timer function
Press Timer repeatedly until the screen shows '00'
Note: when press POWER will also exit the timer setting.
Press Timerrepeatedly to
set the delay OFF time.
Press Timerrepeatedly to
set the delay ON time.
15