Lionelo Sander Bedienungsanleitung Seite 11

• Protect the child safety seat against sunlight. Otherwise, the seat may be too
hot for your child's skin.
• Never leave your child unattended in the restraint system.
• Luggage and other objects that can cause injury in the event of a collision
should be properly secured.
• Child restraints without upholstery should not be used. It is not allowed to
replace the seat upholstery other than recommended by the manufacturer,
because it is an integral part of the device that affects its functioning.
• Keep the seat user manual when using the device. Keep it in the car in which
the product is mounted.
• Do not use load bearing points of contact other than those described in the
instructions and marked on the child restraint.
• If you have doubts about the position of the adult seat belt buckle relative to
the main load-bearing points, contact the child restraint system manufacturer.
• For installation with ISOFIX: refer to the vehicle manufacturer's operating instructions.
Description (fig. 3, 4)
A.
Headrest
B.
Belt guide
C.
Belt pad
D.
Safety belt
E.
Buckle
F.
Adjustment strap
G.
Position changing lever
H.
ISOFIX Fixed lock
ISOFIX fixing
ISOFIX is the system of connectors enabling the installation of safety seats in
a vehicle. It is composed of two handles located between the seats and the
backrest. These handles are attached directly to the structure of the vehicle.
In relation to belts, ISOFIX guarantees more rigid fixing, which translates into increased safety.
The safety seat is equipped with ISOFIX fixing system (including two bottom
ISOFIX connectors and upper strap – TOP TETHER).
Position ISOFIX handles in a relevant place (the safety seat can also be mounted
I.
Safety seat casing
J.
Top tether strap
K.
Five-point safety belt
L.
Safety belt connector
M.
ISOFIX handle
N.
ISOFIX adjustment button
O.
ISOFIX arms
‑ 11 ‑ EN