Making The Electrical Connection - Kaco blueplanet 3.0 TL3 Kurzanleitung

Code (s)
External hexagon
W
Internal hexagon
A
Torx
T
Slot
S
Tab. 1: Key and description of tool codes
3.3 Fastening the mount
WARNING
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seri-
ously injured.
› Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are
only to be used for masonry and concrete.
› Only install the device in an upright position.
4 Installation
4.1

Making the electrical connection

NOTE
Select conductor cross-section, safety type and safety value in accordance with the following basic condi-
tions:
Country-specific installation standards; power rating of the device; cable length; type of cable installation;
local temperature
Detailed information on tightening torques: See comprehensive operating instructions under
ergy.com/de/downloads
Page 6
Shape of the
connector
Tightening torque
Spanner size or number
Outer contour
Fig. 1: Form pattern
Photovoltaic feed-in inverter KACO blueplanet 3.0-10.0TL3
Nm
http://www.kaco-newen-