Safety Instructions - Ferm TCM1006 Gebrauchsanweisung

GB
1 Set of instructions
1

Safety instructions

D
1 Guarantee card
Check the machine, loose parts and accessories for transport damage.
NL
2. SAFETY INSTRUCTIONS
F
Explanation of the symbols
E
Read instructions carefully.
P
In accordance with essential applicable safety standards of European directives.
I
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
S
Indicates electrical shock hazard.
FIN
Immediately unplug the plug from the mains electricity in the case that the cord gets
damaged and during maintenance.
N
Wear ear and eye protection.
DK
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Specific safety instructions
• Check your powertool for damage before starting your work, particularly the diamond
blade. All parts must be fitted properly and must meet all requirements in order to guarantee
the tool's smooth operation. Any safety guards or any lightly damaged parts must be
checked to see if they still function properly before continuing the use of the tool. Moving
parts, and the diamond-blade guard in particular, must be fitted properly and must not jam.
Do not use tools that cannot be switched on or off with the switch.
• The diamond-blade guard must not be jammed or removed.
• Ajamming guard must be repaired immediately.
• The riving knife must not be removed.
Electrical safety
When using electric machines always observe the safety regulations applicable in your country
to reduce the risk of fire, electric shock and personal injury. Read the following safety
instructions and also the enclosed safety instructions.
4
vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på
en genbrugsplads.
Garanti
Læs det separat vedlagte garantikort for garantibetingelserne.
CE
Vi erklærer herved, udelukkende på eget ansvar, at dette
opfylder følgende standarder eller standardiserede dokumenter:
EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN61029-1
98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
Fra 01-01-2007
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til
enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
Ferm Ferm
KONFORMITETSERKLÆRING (DK)
FZT-600
i overenstemmelse med direktivreglerne
Quality Manager Ferm Global
UK
D
NL
F
E
P
I
S
FIN
N
DK
J. Lodewijk
85