Connection Components For Installation; Recommended Filter Pump; Installation And Connection; Installing The Unit - Oase FiltoClear 5000 Inbetriebnahme

Connection components for installation

 B
1 Hose connector, transparent
• Use: Water outlet, dirt water outlet
2 Hose connector, black
• Use: Water inlet
3 Hose connector, black with G2 outer thread
• Use: Open end of the dirt water hose, the cover cap is screwed onto the outer thread
4 Union nuts G2, for installing the hose connectors
5 Cover cap G2, for closing the dirt water outlet
6 Flat seal for black hose connector and cover cap
7 Flow lug for transparent hose connector
8 Hose clip

Recommended filter pump

AquaMax Eco Premium

Installation and connection

Installing the unit

 C
To be taken into consideration for planning:
• For operation at a swimming pond: Install the unit at a distance of at least 2 m from the water.
• For operation at a pond: You can set up the unit directly at the edge of the pond.
• Protect the pressure filter from direct sunlight.
• Route the return hose into the pond so that the water returns to the pond e.g. through a wa-
ter course. This enriches the water with additional oxygen.
• Ensure that the inlet into the pond is max. 2 m above the filter cover.
18
FiltoClear
5000 13000
4000 8000
19000 31000
12000 16000