Protecting The Environment - DeWalt DW717XPS Handbuch

WARNING: Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air vents.
Wear approved eye protection and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into a
liquid.
WARNING: To reduce the risk of injury, regularly clean the
table top.
WARNING: To reduce the risk of injury, regularly clean the
dust collection system.
Optional Accessories (fi g. A3–A6)
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the
risk of injury, only D
be used with this product.
LED WORKLIGHT WARNING:
LED RADIATION: DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
MAXIMUM OUTPUT POWER
P = 9.2 mW;
IEC 60825-1:1:1993; +A1:1997; +A2:2001
Consult your dealer for further information on the appropriate accessories.

Protecting the Environment

Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your D
if it is of no further use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D WALT office at the address indicated in this manual.
E
Alternatively, a list of authorised D
of our after-sales service and contacts are available on the Internet at:
www.2helpU.com.
WALT, recommended accessories should
E
= 456 nm
peak
WALT product needs replacement, or
E
WALT repair agents and full details
E
D WALT is confident of the quality of its products and offers an
E
outstanding guarantee for professional users of the product. This
guarantee statement is in addition to and in no way prejudices
your contractual rights as a professional user or your statutory
rights as a private non-professional user. The guarantee is valid
within the territories of the Member States of the European Union
and the European Free Trade Area.
If you are not completely satisfied with the performance of your
D WALT tool, simply return it within 30 days, complete with all
E
original components, as purchased, to the point of purchase, for
a full refund or exchange. The product must have been subject to
fair wear and tear and proof of purchase must be produced.
If you need maintenance or service for your D
12 months following purchase, you are entitled to one service free
of charge. It will be undertaken free of charge at an authorised
D WALT repair agent. Proof of purchase must be produced.
E
Includes labour. Excludes accessories and spare parts unless
failed under warranty.
If your D
materials or workmanship within 12 months from the date of
purchase, D
of charge or – at our discretion – replace the unit free of charge
provided that:
• The product has not been misused;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised persons;
• Proof of purchase is produced;
• The product is returned complete with all original
components.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised D
D WALT catalogue or contact your D
E
indicated in this manual. A list of authorised D
agents and full details of our after-sales service is available on the
Internet at: www.2helpU.com.
WALT
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
• ONE YEAR FREE SERVICE CONTRACT •
• ONE YEAR FULL WARRANTY •
WALT product becomes defective due to faulty
E
WALT guarantees to replace all defective parts free
E
WALT repair agent in the
E
WALT office at the address
E
E N G L I S H
WALT tool, in the
E
WALT repair
E
35