Technical Data; Safety Instructions - DeWalt DW716 Handbuch

MITRE SAW DW716/DW716E/DW716EXPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 85 mm
Resulting height at max. width 203 mm
45° mitre left
Resulting width at max. height 85 mm
Resulting height at max. width 142 mm
45° mitre right
Resulting width at max. height 85 mm
Resulting height at max. width 144 mm
45° bevel left
Resulting width at max. height 56 mm
Resulting height at max. width 203 mm
45° bevel right
Resulting width at max. height 40 mm
Resulting height at max. width 203 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 168 mm
Automatic blade brake time
Weight
* DW716EXPS with Worklight LED
L (sound pressure)
pA
L (acoustic power)
WA
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
Fuses:
Europe
U.K. & Ireland
U.K. & Ireland
WALT one of the most reliable
E
DW716 DW716E
DW716EXPS
V 230 230
V 230/115 230/115
W 1,675 1,675
mm 305 305
mm 30
mm 1.8 1.8
1
min- 3,600 1,900–3,600
mm 203 203
mm 144 144
mm 85
mm 56
left 50° 50°
right 50° 50°
left 50° 50°
right 50° 50°
mm 190 190
mm 72
mm 133 133
mm 72
mm 134 134
mm 72
mm 190 190
mm 47
mm 190 190
mm 30
mm 23
s < 10.0 < 10.0
kg 20.0* 20.0*
dB(A) 90.8 90.8
dB(A) 103.8 103.8
dB(A) < 2.5 < 2.5
dB(A) 2.8 2.8
m/s² < 2.5 < 2.5
m/s² 1.5 1.5
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
30
Denotes risk of fire.
EC-Declaration of Conformity
85
56
DW716/DW716E/DQW716EXPS
D WALT declares that these products, described under "technical data"
E
have been designed in compliance with:
98/37/EC (until Dec.28,2009); 2006/42/EC (from Dec.29,2009);
2004/108/EC; 2006/95/EC; EN 61029-1:2000 + A11:2003 + A12:2003;
EN 61029-2-9:2002; EN 55014-1; EN 55014-2; EN 61000-3-2;
EN 61000-3-3.
72
For more information, please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
72
makes this declaration on behalf of D
72
47
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
30
01.03.08
23

Safety Instructions

WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250 - 300 Lux). Do not use
the tool where there is a risk of causing fire or explosion, e.g., in the
presence of flammable liquids and gases.
3. Guard against electric shock.
Avoid body contact with earthed surfaces (e.g., pipes, radiators,
cookers and refrigerators). When using the tool under extreme
conditions (e.g., high humidity, when metal swarf is being produced,
etc.), electric safety can be improved by inserting an isolating
transformer or a (FI) earth-leakage circuit-breaker.
E N G L I S H
WALT at the following address or
E
WALT.
E
27