DeWalt DW716 Handbuch Seite 37

Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air vents.
Wear approved eye protection and approved dust mask when
performing this procedure.
WARNING:Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into a
liquid.
WARNING: To reduce the risk of injury, regularly clean the
table top.
WARNING: To reduce the risk of injury, regularly clean the
dust collection system.
Optional Accessories (fi g. A3–A8)
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the
risk of injury, only D
be used with this product.
LASER WARNING:
LASER RADIATION: DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT POWER
<1MW @ 630 NM – 680 NM
IEC 60825-1 +A1, +A2:2002
LED WORKLIGHT WARNING:
LED RADIATION: DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
MAXIMUM OUTPUT POWER
P = 9.2 mW;
IEC 60825-1:1:1993; +A1:1997; +A2:2001
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your D
replacement, or if it is of no further use to you, do not dispose of it with
household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
WALT, recommended accessories should
E
= 456 nm
peak
WALT product needs
E
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D WALT office at the address indicated in this manual.
E
Alternatively, a list of authorised D
of our after-sales service and contacts are available on the Internet at:
www.2helpU.com.
GUARANTEE
SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of
your D WALT tool, simply return it within 30 days, complete
E
as purchased, to the point of purchase, for a full refund or
exchange. Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
in the 12 months following purchase, it will be undertaken
free of charge at an authorized D
of purchase must be produced. Includes labour and spare
parts for Power Tools. Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due to faulty
E
materials or workmanship within 12 months from the date of
purchase, we guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free of charge
provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized
persons.
• Proof of purchase date is produced. This guarantee
is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
agent, please use the appropriate telephone number on
the back of this manual. Alternatively, a list of authorized
D WALT repair agents and full details on our after-sales
E
service are available on the Internet at www.2helpU.com.
WALT repair agents and full details
E
• 30 DAY NO RISK
WALT tool,
E
WALT repair agent. Proof
E
WALT repair
E
E N G L I S H
WALT
E
35