Technical Data; English (Original Instructions) - DeWalt D28715 Betriebsanleitung

HEAVY-DUTY 355 mm CHOP SAW WITH QUICK-CHANGE
CLAMP D28715
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power Input
No-load speed
Min. peripheral speed cutting disc
Disc diameter
Disc bore
Disc body thickness
Thread size of spindel
Type of cutting disc straight, non-recessed
Cross-cutting capacity at 90˚
circular
square
rectangular
angular
Cross-cutting capacity at 45˚
circular
square
rectangular
angular
Weight
Noise values and vibration values (triax vector sum) according to
EN62841-3-10:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
WALT one of the
e
D28715 D28715LX
V 230 115
AC
V 230 115
AC
2 2
W 2200 2200
min -1 4000 4000
m/s 80 80
mm 355 355
mm 25.4 25.4
mm 3.1 3.1
M10 M10
mm 110
mm 110 x 110
mm 100 x 200
mm 140 x 140
mm 110
mm 110 x 110
mm 100 x 140
mm 120 x 120
kg 18.5 18.5
dB(A) 100 98
dB(A) 112 111
dB(A) 3 3
m/s 2 6.2 5.3
m/s 2 1.5 1.5
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Chop Saw
D28715
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-3-10:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
02.11.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
EngLIsh
WALT at
e
WALT.
e
21