Setting Menu; Information Menu; Mowing Tips - AL-KO EasyMow 700 Betriebsanleitung

en
Calling up entry points
Programs
Week program
Entry points
Back Confirm
1. Use the [up arrow key] or the [down arrow key]
to select the [Entry points] menu item until the
star symbol appears to the left of the menu
item.
2. Confirm with the [multifunction key right].
3. Use the [up arrow key] or the [down arrow key]
to select the [Point X*] menu item until the star
symbol appears to the left of the menu item.
4. Set the required distances and set additional
entry points if necessary.
5. Confirm with the [multifunction key right].
6. Press the [menu key] again to return to the
main menu.
By default, the first entry point is al-
ways 1 m to the right of the base sta-
tion, and cannot be changed.
By default, another 9 entry points
are distributed along the overall
length of the boundary cable (after
the 1st edge mowing or complete
loop movement).
These entry points can be changed
and programmed according to the
size and composition of the mowing
area.
Learning entry points
1. Press the [START/PAUSE key] to start the
procedure.
Follow the instructions on the display.
[Learn entry points]
2. Set entry point X.
3. Position: Set Y with the [multifunction key
right].
No entry point is set.
The loop length is measured and the
start points are automatically distri-
buted evenly over the length.
The entry points can be adapted
manually.

SETTING MENU

Set the data, time, language and recalibrate, see
start-up.
34
Entry points
Point X1 at
Point X2 at
Back Confirm
Activate or deactivate the button tones
1. Select [button tones].
2. Confirm with the [multifunction key right] (3-5).
3. Activate or deactivate the button tones with
the [multifunction key right] (3-5).
4. Confirm the corresponding selection with the
[menu key] (3-8).
Changing the display contrast
1 Select [Display contrast].
2 Select [Display contrast] with the [arrow keys]
(3-3) and confirm with the [multifunction key
right] (3-5).
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.
Restoring factory settings
1 Select [Factory settings].
2 Enter the PIN code again and confirm.
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.

INFORMATION MENU

The information menu is used for calling up the
software status, hardware status, current settings
(program info) and faults. No settings can be
made in this menu.
Faults
Display of date, time and fault code with fault mes-
sage. All fault messages since start-up are listed.

MOWING TIPS

Cutting height at a constant 3 - 6 cm, do not
mow off more than half of the lawn height.
Adjust the mowing times accordingly.
If the motor speed drops noticeably because
of thick grass, increase the cutting height and
mow in several passes.
To allow the performance of the robotic
lawn mower to be exploited to the full, we
recommend having the robotic lawn mo-
wer mow the lawn during cool times of
the day or at night.
Setting entry points
Robotic lawn mower