3.3.2 EtherCAT ECAT Out / ECAT In
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Socket
Pin1:
Pin2:
Pin3:
Pin4:
Incorrect connection or inadmissible supply voltage can damage
the transducer!
2x M12, D-coded, 4-pole, female
Tx+ / Transmit Data +
Rx+ / Receive Data +
Tx- / Transmit Data -
Rx- / Receive Data -
VSP/VCP-EtherCAT-200116
29