Product Description - thyracont VSP63E Betriebsanleitung

26

2.3 Product Description

The VSP/VCP vacuum transducer is measuring total gas pressure in the range of
-4
1.0x10 - 1000 mbar. Transducer type VCP with Pt/Rh filament is suitable for ma-
ny applications with corrosive gases in the range 5.0x10
and data are transmitted via EtherCAT interface, the device must be connected to
suitable components only.
In addition the device has a serial RS485 interface for digital data transfer (see
section 5.1).
The VSP/VCP is equipped with a metal-sealed sensor type Pirani and temperature
compensated. It can be mounted to suitable flange connectors.
Proper Use
The VSP/VCP serves exclusively to provide absolute pressure measurements in
gaseous media. It may only be connected to components specifically provided for
such purpose.
Improper Use
The use for purposes not covered above is regarded as improper, in particular:
connection to components which are not specified for in their operating in-
structions
connection to components containing touchable, voltage carrying parts.
No liability or warranty will be accepted for claims arising from improper use.
The user bears the responsibility with respect to the used process media.
VSP: The device is not designed for use in corrosive gas atmos-
phere. Aggressive media such as halogenides, carbon or oxygen
plasma can reduce sensor life-time!
VCP: Aggressive media such as fluorides can reduce sensor life-
time!
Dust, oil or condensing vapours will affect sensor performance and
may cause malfunction!
VSP/VCP-EtherCAT-200116
-4
- 1000 mbar. Readings