Status Led; Bake-Out - thyracont VSP63E Betriebsanleitung

4.2 Status LED

The status LED of the VSP/VCP signalizes the following operational states:

4.3 Bake-Out

When a bake-out of the vacuum chamber is performed with the VSP/VCP being
mounted to the chamber, the temperature at the sensor flange must not exceed
150 C.
The transducer's voltage supply must be switched-off while the
chamber is heated. Otherwise a damage of the electronics can be
the result!
VSP/VCP-EtherCAT-200116
31