Instructions For Indoor Installation Equipment; Included - Cameo H1 D Bedienungsanleitung

TRANSMISSION VIA W-DMX
WARNING: In general, wireless DMX transmission must not be used for applica-
tions involving safety-related factors that might result in personal injury or property
damage in the event of a failure.
This applies in particular to moving scene or traverse structures, DMX-controlled
motors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic
systems or comparable moving components.
Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-
technic devices, explosion-driven effects, or to control gas or liquid effects. These
include CO2 cannons, confetti shooters, water effects or similar.

INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT

1. Equipment for installation applications is designed for continuous operation.
2. Equipment for indoor installation is not weather-resistant.
3. Surfaces and plastic parts can also age in installation equipment, e.g. due to UV
irradiation and temperature fluctuations. This generally does not impair function-
ality.
4. With permanently installed devices, the accumulation of impurities, e.g. dust, is to
be expected. Always observe the care instructions.
5. Unless explicitly stated otherwise on the device, the devices are intended for
installation heights of less than 5 m.

INCLUDED

Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
Product includes:
X Spotlight
X 3x diffusion lens (1x pre-assembled)
X Mounting bracket (pre-assembled)
X User manual
10