Remote Control; Button Description; Menu Button - Sony KLH-W32 Bedienungsanleitung

Remote Control

Button Description

STANDBY STANDBY ON ON
HD15 HD15 HDMI1 HDMI1 HDMI2 HDMI2
OPTION1 OPTION1 OPTION2 OPTION2
DISPLAY DISPLAY PICTURE PICTURE
SOUND SOUND
ECO ECO
ON ON ID MODE ID MODE OFF OFF
SET SET
RM-FW001 RM-FW001
Notes
• The 5 button and button have a tactile dot. Use the tactile dot as a reference when operating the display.
• Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control's
battery compartment.
12
GB
1 POWER ON switch
Press to turn the display on.
2 HDMI 1/ HDMI 2 button
Press to select the signal input to the HDMI 1 or HDMI 2 connectors.
button
3
Press to change the aspect ratio in "Wide Mode". See page 14.
button
4
Selects the "PAP" (Picture And Picture) mode. Each press toggles
between the two-picture screen and the single-picture screen. See
page 15.
5 PICTURE button
Selects "Picture Mode". Each press toggles between "Vivid",
"Standard", "Custom", and "TC Control".
6 F/f/G/g/
The
F/f/G/g
etc. Pressing
In the "PAP" mode, you can switch the active picture with
7 SOUND button
Selects "Sound Mode". Each press toggles between "Dynamic",
"Standard", "SRS WOW", and "Custom".

8 MENU button

Press to show menus. Press again to hide them. See page 18.
Push and slide to open
,
buttons
buttons move the menu cursor (yellow) and set values,
sets the selected menu or setting items.
.
G/g