Cleaning And Maintenance - EINHELL RT 300 Gebrauchsanweisung

GB
11. Replacing the line spool
Be sure to disconnect the power plug from the
power supply by you replace the line spool!
Holding the reel holder (Figure 14 / 8) in the one
hand, use the other hand to depress the grooves on
the side of the reel cover (Figure 14 / 9) and unscrew
the reel cover as indicated by the arrow on the reel
cover itself. After you have taken off the reel cover,
remove the empty line reel, taking care not to lose
the setting button and the spring. Insert the button
and spring in the reel holder. Take the new line reel,
push the ends of the lines through the holes in the
reel cover, and refit the reel cover (Figure 16).
Turn the reel cover clockwise until it latches home.
Now press the setting button and pull out the lines to
a length of approx. 15 cm (Figure 17/18). The cutting
line will be shortened automatically to the correct
length the first time the trimmer is restarted.

12. Cleaning and maintenance

Switch off and unplug the grass trimmer before
putting it away or cleaning it.
Remove deposits from the guard hood with a
brush.
Clean the plastic body and plastic parts with a
mild household detergent and a damp cloth.
Never use aggressive agents or solvents for
cleaning purposes!
Never spray down the grass trimmer with water.
Prevent water getting into the trimmer at all cost.
14