SOLL.
Quick start key
Programmed key
Configuration key
Update key
Language update
key
Press to go to the next menu where, by selecting
one of the three cycles suggested, you can access
the screen for the settings. This allows you to
perform the set cycle by pressing the quick start
key on the "HOME" screen (see para. 7.5 "HOME"
screen). To reset the cycle in quick start, press the
key
.
Press to go to the menu where the defrost and cell
sanitisation cycles can be programmed. These
default cycles are programmed to be performed
every night.
Press to go to the configuration page.
Press to go to the software update page.
Press to go to the translation update page.
Translation of the original instructions in Italian
70
APPLIANCE
Rev. 01 of 01/07/2019