Nordcap SKF 12F GN 2/1 PLUS Bedienungsanweisung Seite 66

SOLL.
Press to go to the screen where the
name of the core probe can be
entered. The name is written using
Name core probe
an
key
appears when the "Add" field is
pressed (
Press to go to the screen where the
cycle recipe can be saved. The name
of the cycle recipe and any notes can
Save recipe key
be written using an alphanumeric
keypad that appears when a field is
selected.
Save key Press to save the changes made.
Home key Press to go to the "Home" screen.
Start key Press to start the cycle.
Stop key Press to stop the cycle.
Save key Press to save the changes made
Press to go to the screen where the
Advanced key
different cycle phases can be set.
Confirm key Press to save the edited parameters.
OK key Press to confirm the data entered.
Press to cancel the set data and go
Cancel key
back to the previous screen.
Press to activate the cycle in the soft
Soft key version (key not present in the
Manual cycle).
Press to activate the cycle in the
Hard key hard version (key not present in the
Manual cycle).
Translation of the original instructions in Italian
66
alphanumeric keypad
).
Rev. 01 of 01/07/2019
that
APPLIANCE