Clock Functions - Leonard LBN1413X Benutzerinformation

10 Leonard
Heating Application
function
This function is designed to
save energy during cooking.
When you use this function,
Moist
the temperature in the cavity
Baking
may differ from the set tem‐
perature. The heating power
may be reduced. For more
information refer to "Daily
Use" chapter, Notes on:
Moist Baking.
Notes on: Moist Baking
This function was used to comply with the
energy efficiency class and ecodesign

CLOCK FUNCTIONS

Clock functions
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
How to set: Clock functions
How to change: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut
or when the timer is not set.
Step 1
- press repeatedly.
requirements according to EU 65/2014
and EU 66/2014. Tests according to EN
60350-1.
The oven door should be closed during
cooking so that the function is not
interrupted and the oven operates with the
highest energy efficiency possible.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter,
Energy Saving.
Application
To set, change or check the time of day.
To set how long the oven works.
To set when the oven turns off.
To combine functions: Duration and End Time.
To set a countdown. This function has no effect on the opera‐
tion of the oven. You can set this function at any time, also
when the oven is off.
- starts to flash.