Niviuk OCTAGON 2 Handbuch Seite 10

Follow the outer suspension line to find the centre panels and begin
the folding process. (Image
7.10 DIVIDING THE PANELS
First fold all the panels one by one to the right side of the suspension
lines. While doing this, check for any signs of damage or deterioration of
the fabric.
By folding each panel to the left side of the suspension lines again
one by one, check carefully that each panel is laid evenly and without
creases. Check the main seams and inside the panels as well.
Make sure that all the skirts are even and all the loops lie in the same
direction. (Image G)
10
F)
Fold both sides corner at a 45° angle. The skirts fold should be in line
with the wind channel but not overlapped.
F
Fold 1/5 of the canopy from the right and 1/5 from the left toward
the center. Fold 1/3 of the canopy to the left, and fold another 1/3
to the right side. Then, fold the right half of the canopy onto the left.
(Image I)
G
(Image H)
H
I