Intended Use; General Safety Instructions - Simons Voss Technologies PinCode-Tastatur Kurzanleitung

1. Intended use

1 Intended use
Use the PIN code keypad MobileKey to operate locking devices by
entering an authorised User PIN (see section on
You need to change the Master PIN and assign a User PIN to do so.
You can programme the PIN code keypad using the MobileKey web app
(SmartIntego: SmartIntego manager and integrator system). The PIN
code keypad is added as a "key" with PINs and assigned to a lock.
The PIN code keypad contains a LockNode with a "Chip ID" and is
assigned to the SmartBridge located within range when the network is
configured. If a correct user PIN length has been entered, the PIN is
transmitted to the server (SmartIntego: To integrator system) via
WaveNet, where it is evaluated.

2 General safety instructions

Signal words
DANGER: Death or serious injury (likely), WARNING: Death or serious
(ANSI
injury (possible, but unlikely), CAUTION: Minor injury, IMPORTANT:
Z535.6)
Property damage or malfunction, NOTE: Low or no damage
26 / 156
PinCode-Tastatur (online)
}
Operation [ 36]
).
EN