Eu Declaration Of Conformity - Protool DuraDrive DWC 18-2500 DEC Originalbetriebsanleitung

EU only: European Directive 2006/66/EC
stipulates that faulty or used battery packs/
batteries must be recycled.
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally
responsible recycling centre. Observe the
valid national regulations.
EU only: European Directive 2002/96/EC
stipulates that used electric power tools
must be collected separately and disposed
of at an environmentally responsible recy-
cling centre.
Information on REACh:
www.protool-online.com/reach
14 Warranty
For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but
in any case for at least 12 months. Within
the EU member states, the warranty period
is 24 months (verifi cation through invoice
or delivery note).
Damage caused by, in particular, natural
wear, overloading, incorrect handling, or
damage caused by the operator, or dam-
age caused through use of the equipment
contrary that specifi ed in the Operating In-
structions, or damage which was known at
the time of purchase, is not covered by the
warranty. Furthermore, damage caused by
the use of non-original PROTOOL accesso-
ries and consumable material (e. g. sanding
pads) is also excluded.
Complaints can only be recognised if the
tool is returned while still assembled to the
supplier or an authorised PROTOOL Cus-
tomer Service workshop. Keep the Operat-
ing Instructions, Safety Instructions, Spare
Parts List and purchase receipt in a safe
place. Otherwise the respective, current
warranty condi tions of the manufacturer
shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
15 EU Declaration of
Conformity
Cordless drywall
screwdriver
DWC 18-2500 DEC
DWC 18-4500 DEC
We declare under our sole responsibility
that this product is in conformity with the
following standards or standardization doc-
uments:
EN 55 014-1, EN 55 014-2, EN 60 745-1,
EN 60 745-2, EN 61 000-3-2, EN 61 000-3-3,
EN 50 366 according to the provision of the reg-
ulations stipulated in Directive 2006/42/EC,
2 0 0 4 / 1 0 8 / E C ,
03.01.2013).
Charger
BC 3
We declare under our sole responsibility
that this product is in conformity with the
following standards or standardization doc-
uments:
EN 60 335-1, EN 60 335-2-29, EN 55 014-1,
EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3,
EN 50 366 according to the provision of the reg-
ulations stipulated in Directive 2006/95/EC,
2 0 0 4 / 1 0 8 / E C ,
03.01.2013).
Head of Research, Development and
Technical Documentation
Festool Group GmbH & Co. KG
Wertstr. 20
D-73240 Wendlingen, Germany
04.07. 2012
21
Serial no.
497488
10003043
2 0 1 1 / 6 5 / E U
Serial no.
494945
2 0 1 1 / 6 5 / E U
Dr. Johannes Steimel
( f r o m
( f r o m