Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
[6-1] Clip
[6-2] Screw
[7-1] Hook
[7-2] Screw
[8-1] Bit, long
[8-2] Auto feed attachment
[9-1] Depth stopper button
[9-2] Depth stopper
[9-3] Screw length scale
[10-1] Control wheel for screwing depth
[10-2] Presetting indicator
[10-3] Collated screws
[12-1] Arresting button
[12-2] Sign for dismounting the slides
[13-1] Button
[13-2] Transport lever
[13-3] Spring
The accessories shown or described do not
have to be included with the supplied tool.
3
Properties of tool
3.1 Intended use
The PROTOOL drywall screwdriver is de-
signed for the following works:
Main application Screw types
Gypsum plaster
boards on met-
al profi le rails
(≤ 0.88 mm)
Gypsum plaster
boards on met-
al profi le rails
(≤ 2.25 mm)
Gypsum plas-
ter boards on
wooden con-
structions
Gypsum fi bre
boards on met-
al and wooden
constructions
Drywall screws
with fi ne thread
Drywall screws,
self-drilling
Drywall screws
with coarse
thread
Drywall screws
with milling ribs
Chip boards/
OSB on wooden
constructions
BC 3 charger is designed for charging the
battery packs listed.
The user is responsible for any damages
and injuries caused by use which does not
conform to the intended purpose; including
any damages and wear caused by perma-
nent industrial use.
4
Safety instructions
DANGER
4.1 General Safety Instructions
WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings re-
Type
fers to your mains-operated (corded) power
tool or battery-operated (cordless) power
tool.
4.2 Safety instructions specifi c
for the respective tool
- Always hold the power tool by the insu-
lated handles if there is a possibility of
drilling into hidden power cables.
×
- Take care when drilling into walls as there
is a danger of rupturing concealed gas/
water pipes or cutting through power ca-
bles.
×
- Do not open the battery pack or the
charger. Even after disconnection from
the mains, there is still a high capacitor
voltage inside the charger.
×
- Make sure that metal objects (such as
metal chips) do not collect in the battery
pack retaining slots or enter the machine
through the air vent slits (danger of short
circuit).
×
- Protect the battery pack from heat, such
as constant sunlight or naked fl ames.
There is a risk of explosion.
- Never use water to extinguish burning
15
Wood construc-
tion and chip
board screws
up to
5 mm
×
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
