Setting Mode; How To Navigate In Setting Mode - Electrolux GA60SLVC Benutzerinformation

Settings
Rinse aid level
End sound
Auto door open
Key tones
Latest prog. selec‐
tion
Display on floor
Brightness
Language
Reset settings
PNC number
1) For more details, refer to the information provided in this chapter.

6.1 Setting mode

How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A B
A. Previous button
B. OK button
C. Next button
Values
From level 0 to lev‐
el 6 (default: 4)
ON
OFF (default)
ON (default)
OFF
ON (default)
OFF
ON
OFF (default)
ON (default)
OFF
From level 0 to lev‐
el 9
List of languages
(default: English)
YES
NO
Number
C
Description
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate AirDry.
Activate or deactivate the sound of the
buttons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
1)
options.
Activate or deactivate TimeBeam.
Adjust the brightness of the display.
Set the preferred language.
Reset the appliance to the factory settings.
Check the PNC number of your appli‐
1)
ance.
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
• The lights related to the
Previous, OK and Next are on.
• The display shows the first
available setting and its current
value.
ENGLISH 11
1)
1)
1)
1)
and for