Setting Mode; How To Navigate In Setting Mode - Electrolux GA55GLV Benutzerinformation

Number Setting
4 Auto door open On (default)
5 Key tones
6 Latest pro‐
gramme selec‐
tion
7 Display on
floor
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in

setting mode.

When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
1 2 3 4 5 6 7
6.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A B
Values
Description
Activate or deactivate the AirDry.
Off
On (default) Activate or deactivate the sound of the
Off buttons when pressed.
On Enable or disable the automatic selec‐
Off (default) tion of the most recently used pro‐
gramme and options.
On (default) Activate or deactivate the TimeBeam.
Off
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
The lights related to the Previous, OK
and Next are on.
How to change a setting
Make sure the appliance is in setting
mode.
1. Use Previous or Next to select the
2. Press OK to enter the setting.
C
1)
and
bar of the ECOMETER dedicated to
the desired setting.
• The bar of the ECOMETER
dedicated to the chosen setting
flashes.
• The display shows the current
setting value.
ENGLISH 11
for