Trademarks And Licenses; Open Software Licenses; Obtaining Gpl/Lgpl/Gpl V3 Licensed Software; Specifications - Sony ODS-L30M Bedienungsanleitung

Trademarks and Licenses

Open Software Licenses

On the basis of license contracts between Sony and the
software copyright holders, this product uses open
software.
To meet the requirements of the software copyright
holders, Sony is obligated to inform you of the content of
these licenses.
For the content of these licenses, see "License" in "Help".
Obtaining GPL/LGPL/GPL V3
Licensed Software
This product uses software licensed under GPL version 2 /
LGPL version 2.1 / GPL version 3. You have the right to
obtain, change, and distribute the source code of this
software.
You can download the source code of this software from
Sony Internet servers. For more information about how to
download it, access the following URL.
http://oss.sony.net/Products/Linux/common/search.html
We cannot respond to inquiries regarding the content of
the source code.
64
Trademarks and Licenses / Specifications

Specifications

ODS-L30M specifications shown. For ODS-L60E,
ODS-L100E, ODBK-201, ODBK-103, ODS-D77F,
ODS-D280F, and ODS-D380F specifications, refer to the
Operation Guide for each device.
General
Power requirements
100 V to 240 V AC, 50 Hz/60 Hz
Current consumption
1.6 A to 3.7 A
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Storage temperature
–20 °C to +55 °C (–4 °F to +131 °F)
Operating humidity
20% to 80% (relative humidity)
Storage humidity
Less than 75%
Mass 31 kg (68 lb. 5.5 oz.)
(excluding drive units and cartridges)
Dimensions (W × H × D)
445 × 308 × 992 mm (17
1
39 / inches) (excluding protrusions)
8
Input/output
(Network) RJ-45 type modular jack (2)
1000BASE-T: IEEE 802.3ab standard
100BASE-Tx: IEEE 802.3u standard
Accessories
Operation manual (1)
Rack mount kit (1 set)
Rack mount plate washers (4)
Screws (B4 × 10) (8)
Screws (B5 × 16) (8)
Mounting brackets (2)
Thickness gauge 025 (3)
Thickness gauge 050 (3)
Thickness gauge 100 (3)
Height support 025 (3)
Height support 050 (3)
Height support 100 (3)
Height support M 025 (1)
Height support M 050 (1)
Height support M 100 (1)
I/E station labels (1 set)
5 1
/ × 12 / ×
8 4