SCHUNK EOA-TM KGG 100-80 Montage- Und Betriebsanleitung Seite 44

Assembly
18
01.00 | ID no. 1399641 | Assembly and Operating Manual | en | 1399703
Attach the gripper unit (1) to the adapter plate (3) using
Ø
screws (4) and cylindrical pins (2).
Connect compressed air supply tube (1).
Ø
Connect cable (2).
Ø
Note: The 8-pin cable is included in the accessory kit.
Further information contains the assembly drawing on the CD.
Additional information on the connections of the components can
be found in the documentation on the CD,
Applicable documents [ } 5].