Product Description; Inserting Batteries - Concept VK5590 Bedienungsanleitung

PRODUCT DESCRIPTION

1. Weighing surface
2. ON/OFF/TARE button
(Switching on/off /tare)
3. Display
OPERATING INSTRUCTIONS

INSERTING BATTERIES

1. Open the battery compartment cover located in the bottom section (Fig. 1).
2. Insert 4 AAA batteries in the battery compartment, and replace the cover
carefully. Use alkaline batteries!
SELECTION OF WEIGHING UNITS
When switched off , set the required units (g, lb: oz.) using the switch located on the
underside (Fig. 2).
WEIGHING
1. Place the appliance on a stable, horizontal surface.
2. Push the ON/OFF/TARE (2) button to switch on the appliance.
3. If you need to reset the display reading (3), press the ON/TARE/OFF button (2).
4. Place the food or container with food you wish to weigh on the weighing surface
(1). Load the weighing surface (1) evenly, and do not put anything on the edges.
Otherwise, the weighing result might be inaccurate, and there would be the risk
of falling.
5. If you are making up the full weight, or need to eliminate the weight of the
vessel used (the tare function), push the ON/OFF/TARE (2) button to reset the
displayed reading (3).
6. When the weighing is fi nished, switch the appliance off by pressing and holding
down the ON/OFF/TARE (2) button, or the appliance will switch off automatically
after 2 minutes.
14
1
3
2
EN
Fig. 1
Fig. 2
VK5590