Product Description; Cleaning And Maintenance - Concept VD4000 Bedienungsanleitung

EN
• Do not use the appliance if it is not working properly, has been dropped,
damaged or immersed in liquid. Have it checked and repaired by an
authorized service centre.
• Do not use the appliance with a damaged cord or plug and have it
repaired immediately by an authorized service centre.
• Do not wrap the power cord around the appliance body.
• Do not use the appliance outdoors.
• The appliance is only suitable for home use and is not intended for
commercial use.
• Do not immerse the power cord, plug or appliance in water or any
other liquid.
• Do not use any accessories other than those recommended by the
manufacturer.
• Do not repair the appliance yourself. Contact an authorized service
centre.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Cleaning and maintenance performed
by the user must not be carried out by children unless they are 8 years
old and under supervision. Children aged under 8 years of age must be
kept away from the appliance and its power cord. Do not let children
play with the appliance.
Damages from failure to follow the manufacturer's instructions are
not covered by the warranty.
24

PRODUCT DESCRIPTION

1 Switching On/Off /Zero setting
2 Holding the scale
3 Units
4 Display
OPERATING INSTRUCTIONS
Buttons
1. Press ON/OFF/TARE
- Press this button to switch on/off the device.
- If you use towel below baby´s body, put it on the platform and press the button to set the
display to "0".
2. Button HOLD
- Press this button to hold baby´s weight.
3. Button UNIT
- Press this button to set measuring units: gram (g), kilogram (kg), pound (lb) or stone (st: lb).
4. Display (LCD)
Weighting
1. Place the scale on a solid and even surface.
2. Press "ON/OFF", "Hi" will be displayed.
3. You can start weighting, when "0,00 kg" has been displayed.
4. Put the baby or other things on the scale, the weight will be shown on the LCD display
5. Press and hold "ON/OFF" to switch off the scale (or the scale will be automatically switched off
after 30 seconds of inactivity).
Installation and connection of the app
1. Download AiLink app from Appstore or Google Play. (Fig.1)
2. Switch on Bluetooth on your mobile telephone and open the app..
3. Click on Add Device and select Baby Scale (Bluetooth), (Fig. 2 and 3)
4. Switch on the scale and click to Next (Fig .4)
5. When the scale is displayed, confirm your selection (Fig.5)
6. Now you can start using the scale

CLEANING AND MAINTENANCE

CAUTION!
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as
they can damage the surface of the appliance! Never clean the appliance under running
water, do not rinse it or immerse it in water!
VD4000 VD4000
EN
Control knob
Error Overloading
Lo Low battery
25