Herunterladen Inhalt Inhalt Diese Seite drucken

Clamping A Workpiece; Operation Of The Cnc System - STEPCRAFT D-Serie Betriebsanleitung

Vorschau ausblenden Andere Handbücher für D-Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.2.3 Vacuum Table (optional)
You can use the vacuum technology to clamp your workpieces. For this purpose, attach your Vacuum Table to the alumi-
num T-Slot table of your STEPCRAFT D-Series and connect it to your vacuum cleaner. Due to the developing vacuum,
even and airtight plate materials, such as composites, wood (even structure), plastics and aluminum are fixed on your
CNC machine. Note: We strongly recommend the use of the optionally availabe Air Regulator (opt. EU Item 10047, US
Item 10047) when using a common household vacuum cleaner.

6.3 Clamping a Workpiece

Use clamps or another practical and secure way to fix the workpiece on the machine table, e. g. with the
help of a vacuum table, double-sided tape or clamps. Holding a workpiece with your hands leaves it unsta-
ble and may lead to loss of control or serious injury.
The workpiece can be secured directly on the machine table using the integrated clamping system or clamping devices
such as the Clamping Set (opt. EU Item 10063, US Item 10063). If you want to mill through the material and produce
cutouts, we recommend the use of a suitable material as spoil board. The workpiece should be sufficiently clamped to
prevent it from unintentional movement during processing. The maximum workpiece size results from the maximum
clamping length and width:
Machine
STEPCRAFT D.300
STEPCRAFT D.420
STEPCRAFT D.600
STEPCRAFT D.840

6.4 Operation of the CNC System

The entire CNC system is controlled and operated via computer. The operator must have completely read and understood
the entire documentation of the CNC control software before commissioning the CNC system. For further questions re-
garding the applied control software, please contact the respective software manufacturer.
Clamping length [mm]
380
500
680
920
45
Clamping width [mm]
222
312
432
615

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

D.300D.420D.600D.840

Inhaltsverzeichnis