Herunterladen Inhalt Inhalt Diese Seite drucken

Flexible Induction Cooking Area - Electrolux EIV65443 Benutzerinformation

Vorschau ausblenden Andere Handbücher für EIV65443:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51
5. Touch
of the Timer to select an
automatic mode.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
When you finish cooking and
deactivate the hob, the hood fan
may still operate for a certain
period of time. After that time the
system deactivates the fan
automatically and prevents you
from accidental activation of the
fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually.
To do that touch
when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!
Refer to Safety chapters.
6.1 FlexiBridge function
The flexible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
different size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Standard (activated
automatically when you activate the hob), Big
Bridge and Max Bridge.
To set the heat setting use two
left side control bars.
Switching between the modes
To switch between the modes use sensor
field:
.
speed manually. When you press
raise the fan speed by one. When you reach
an intensive level and press
set fan speed to 0 which deactivates the
hood fan. To start the fan again with fan
speed 1 touch
.
To activate automatic operation
of the function, deactivate the
hob and activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
When you switch between the
modes the heat setting is set
back to 0.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible. Place the cookware centrally on the
selected area!
Place the cookware with the bottom diameter
smaller than 160 mm centrally on a single
section.
you
again you will
ENGLISH
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis