Service And Transport; Information Related To Transport - Sharp K-70V19IM2-EU Bedienungsanleitung

SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTACTING SERVICE
If the oven does not operate:
The oven may have be switched off, or
disconnected. On models fitted with a
timer, the time may not be regulated.
If the oven does not heat:
the heat may be not adjusted with the
oven's heater control switch.
If the interior lighting lamp does not
light:
The electricity must be inspected. It
must be inspected to see whether the
lamps are defective. If they are defecti-
ve, you can change them following the
guide.
Cooking (if the lower-upper parts do not
cook equally):
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Except these, if you still have any prob-
lem with your product, please call to the
Authorized Service Centre.
INFORMATION RELATED TO
TRANSPORT
If you need any transport:
Keep the original product packaging
and use the original case for carrying.
Follow the transport instructions on the
case. Tape the cooker on upper parts,
hats and heads and saucepan carriers
to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces of the
oven.
Tape cardboard or paper onto the front
cover on interior glass of the oven as it
will be suitable to the trays, for the wire
grill and trays in your oven not dama-
ge to the oven's cover during transport.
Also tape the oven's covers to the side
walls.
If you do not have the original case:
Take appropriate measures of the ex-
ternal surfaces (glass and painted sur-
faces) of the oven to protect it against
possible blows.
EN - 19