Adjusting The Time - Sharp K-70V19IM2-EU Bedienungsanleitung

4.2. HOW TO USE THE VISIO
TOUCH CONTROL UNIT
Mode Key
M
Alarm Key

Adjusting the Time:

When the built in oven is installed, the
time of day must be adjusted according
to the instructions below.
When the oven is installed,"0.00" will
start to flash on the display. Press the
"M" sensor or " - " and " + " sensors to
adjust the time mode. The " : " symbol
will start to flash on the display. You can
adjust it using the " - " and " + " sensor.If
the Auto cooking mode is off, press " - "
and " + " sensors at the same time to the
day time mode. You can adjust it using
the " - " and " + " sensor.
You have to adjust the time to use the
oven function.
Oven function
display
EN - 13
Timer Display
Temperature display
ADJUSTING THE COOKER
TIME:
Adjusting the Minute Minder:
press the alarm sensor which shows the " "
symbol. " " will flash on the display. "0.00"
will appear on the clock digits. Adjust the
desired time period for the warning by
using Timer "+" and "-" sensor while the
symbol is flashing. Some time after the
completion of the adjustment, the symbol
will be lit continuously. When the symbol
begins to light continuously, the audible
warning time adjustment is complete.
When the set time is up, the timer gives
an audible warning and symbol begins
to flash on the screen. Pressing " - "or
"+" will stop the audible warning and the
symbol disappears on the screen.
Time setting/
Temperature settings
for meat probe/ Key
lack Key
Time setting key