Key Lock Function - Sharp K-70V19IM2-EU Bedienungsanleitung

A d j u s t i n g t h e C o o k i n g
Duration Time:
This function is used to cook in the desired
time range. The foods to be cooked are
put into the oven. The oven is adjusted
to the desired cooking function. The oven
temperature is adjusted to the desired
degree depending on the dish to be
cooked. press on the "M" sensor until
you see Duration time symbol " |>| " on
the timer display screen. "AUTO" appears
on the display. Adjust the cooking period
for the food you wish to cook, by using
the Timer "+" and "-" sensor while the
timer is in this position. Some time after
the adjustment operation is completed,
the day's time will appear on the screen
and the Duration time symbol will be lit
continuously on the screen.
At the completion of the set duration,
the timer will stop the oven and give an
audible warning. Additionally, "AUTO"
will begin to flash on the screen. Touching
any sensor of the control unit will end the
audible warning. "AUTO" will go on to
flash mode. press " - " and " + " symbols
at the same time to finish "AUTO" mode.
Adjusting the Cooking End Time:
This function is used to cook after a certain
period of time, within a certain duration.
The food to be cooked is put into the
oven. The oven is adjusted to the desired
cooking function. The oven temperature is
adjusted to the desired degree depending
on the dish to be cooked.
press on the "M" sensor until you see
Duration time symbol " |>| " on the timer
display screen. "AUTO" appears on the
display. Adjust the cooking period for the
food you wish to cook, by using the Timer
"+" and "-" sensor while the timer is in
this position.Then press the "M" sensor
until you see " >| " symbol. The day time
will begin to flash, with the addition of the
cooking period. Adjust the finishing time
for the food by using the Timer "+" and "-"
sensor while the timer is in this position.
Some time after the adjustment operation
is completed, the day time will appear on
the screen and the " >| " symbol will be
lit continuously on the screen. The oven
will start operating at the time calculated
by deducting the cooking period from the
set finishing time, and will stop at the
set finishing time. The timer will give an
audible warning and "AUTO" will begin
to flash on the screen will begin to flash.
Touching any button of the timer will end
the audible warning. "AUTO" will go on to
flash mode. press " - " and " + " symbols
at the same time to finish "AUTO" mode.
Digital Timer Sound Adjustment:
press the "-" sensor until you hear a
sound. The timer will give an audible
signal beep. After that each time the "-"
sensor is pressed, the timer will give three
different types of signal beep. Do not press
any further sensor and the timer will save
the last selected signal type.

Key Lock Function

The key lock function is used to prevent
operating any functions of the control unit
by mistake. press the "+" sensor until you
see the key lock symbol on the display to
activate the key lock. press the "+" sensor
to deactivate the key lock.
EN - 14