Service And Transport - Sharp K-71V28BM2-EU Bedienungsanleitung

the inner frame do not require cleaning.
However; depending on usage, it is re-
commended that you replace them after
a certain period of time.
MAINTENANCE
Replacing the Oven Light
The change of oven lamp must be done
by authorized technician. The rating of
the bulb should be 230V, 25Watt, Type
E14,T300 before changing the lamp,the
oven should be plugged off and it sho-
uld be cool.
The lamp design is specific for the use
in household cooking appliances and it
is not suitable for household room illu-
mination.
SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTAINING TO SERVICE
If the oven does not operate :
The oven may be plugged off, there has
been a black out. On models fitted with
a timer, time may not be regulated.
If the oven does not heat :
The heat may be not adjusted with
oven's heater control switch.
If the interior lighting lamp does not light
:
The electricitiy must be controlled. It
must be controlled whether the lamps
are defective. If they are defective, you
can change them as following the gu-
ide.
Cooking (if lower-upper part does not
cook equally) :
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Except these, if you still have any prob-
lem with your product, please call to the
"Authorized Service".
INFORMATION RELATED TO
TRANSPORT
If you need any transport :
Keep the original case of product and
carry it with its original case when need
to be carried. Follow the transport signs
on case. Tape the cooker on upper
parts, hats and heads and saucepan
EN - 19