Service And Transport - Sharp K-60V19BQM-EU Bedienungsanleitung

Replaceable light source
by a professional
The lamp is designed specifically
for use in household cooking
appliances. It is not suitable for
household room illumination.
SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTAINING TO SERVICE
If the oven does not operate :
The oven may be plugged off, there has
been a black out. On models fitted with
a timer, time may not be regulated.
If the oven does not heat :
The heat may be not adjusted with
oven's heater control switch.
If the interior lighting lamp does not light
:
The electricitiy must be controlled. It
must be controlled whether the lamps
are defective. If they are defective, you
can change them as following the gu-
ide.
Cooking (if lower-upper part does not
cook equally) :
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Except these, if you still have any prob-
lem with your product, please call to the
"Authorized Service"
carriers to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape
of oven.
Tape carboard or paper onto the front
cover on interior glass of oven as it will
be suitable to the trays, for the wire
grill and trays in your oven not
damage to the oven's cover during
transport. Also tape the oven's covers
to the side walls.
If does not have the original case :
Take measure for external surfaces
(glass and paintes surfaces) of
oven against possible blows.
EN - 19
to the side surfaces