Inhaltsverzeichnis
Werbung
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CORDLESS DRILL
50G275
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIFIC REGULATIONS REGARDING SAFE USE OF DRILL
• Use ear protectors and safety goggles when operating drill.
Exposure to noise may cause hearing loss. Metal dust and other
particles floating in the air may cause permanent eye injury.
• Use additional handles supplied with the tool. Loss of control may
cause operator personal injury.
• During tasks when work tool can hit hidden electric wires, hold
the tool by insulated areas of the handle. Contact with power
supply line may transfer voltage to metal parts of the tool and cause
electric shock.
ADDITIONAL RULES FOR SAFE DRILL OPERATION
• Use only recommended battery and charger.
• Always keep the battery away from sources of fire. Do not leave the
battery for a long time in high temperature (in direct sunlight, in
proximity of heaters and wherever the temperature exceeds 50
• Battery charging process should be supervised by the user.
• Avoid charging the battery in temperature lower than 0
• Charger supplied with the drill is designed for operation with this
product only. Do not use it for other purposes.
• Do not put any metal objects into the charger.
• Do not change direction of spindle rotation when the tool is
operating. Otherwise drill may be damaged.
• Use soft, dry cloth to clean the drill. Never use detergents or
alcohol.
• Disconnect charger from power supply before cleaning.
• If you intend to charge more than one battery successively, make a
30 minute break between charges.
SPECIAL SAFETY CONDITIONS FOR CHARGER OPERATION
• This equipment is not intended for use by persons with restricted
physical, sensory or mental capabilities (including children) or persons
who have no experience or are unfamiliar with the equipment, unless
work is supervised or carried out in accordance with equipment
use instructions handed over by persons responsible for safety.
Pay attention to children so they don't play with the equipment.
• Check condition of charger, cable and plug before each use. Do not
use the charger if it is damaged.
• Keep this manual. It contains important drill use and safety
instructions.
• Before using the charger, read all relevant information contained
within this manual, see markings on the charger and the product
it is designed for.
• To reduce the risk of potential body injury use the charger for
charging Li-Ion batteries only. Batteries of other types may explode
and cause personal injury or material damages.
• Do not expose the charger to humidity or water.
• Use of any connecting elements not supplied or not recommended
by the manufacturer of the charger may cause fire, personal injury
or electric shock.
• Make sure the power cord is not located in a pathway, is not exposed
to treading or other danger (e.g. strong tension).
• Do not use extension cord unless absolutely necessary. Use of
improper extension cord may cause fire or electric shock. If it is
necessary to use extension cord, first make sure that:
– Extension cord socket matches plug prongs of the original
charger power cord.
– Extension cord is in good technical condition.
• Do not use the charger with damaged cord or plug. Damage should
be repaired by a qualified person.
• Do not use the charger after it has been hit, dropped or otherwise
damaged. Entrust the testing and potential repair to authorized
service workshop.
• Do not try to dismantle the charger. All repairs should be made by
an authorized service workshop. Improper charger assembly may
cause electric shock or fire.
• Disconnect the charger from power supply before starting any
maintenance or cleaning.
• In case of battery damage or improper use it may produce gas.
Ventilate room and seek medical attention in case of medical
symptoms.
• Keep the charger clean. Dirt can be the cause of electric shock.
• Do not use charger when placed on flammable surface (e.g. paper,
textiles) or in proximity of flammable substance. Greater charger
temperature during charging increases risk of fire.
When the charger is not in use, it should be disconnected from
mains network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
Li-Ion batteries may leak, set on fire or explode when heated to
high temperature or short-circuited. Do not store the batteries
in a car in hot and sunny days. Do not open the battery. Li-Ion
batteries contain electronic protection devices that, if damaged,
may cause fire or explosion of the battery.
EXPLANATION OF USED SYMBOLS
o
C).
o
C.
1
5
9
1.2.Read the instruction manual, observe warnings and safety
conditions therein.
3. Use protective goggles and hearing protectors.
4. Keep the tool away from children.
5. Protect against rain.
6. Device with class II insulation.
7. Disconnect the power cord before starting maintenance or
operation.
8. Use indoors, protect from water and moisture.
9. Do not throw into fire.
10. Maximum permissible cell temperature.
11. Recycling
CONSTRUCTION AND USE
Drill is a battery powered tool. Drive consists of a DC commutator
motor with permanent magnets and planetary gear. Drill is designed
for screwing in and out screws and bolts in wood, metal, plastics and
ceramics, and for drilling holes in these materials. Cordless, battery-
powered power tools are especially useful for works in interior
furnishing, adaptation of premises etc.
Use the power tool according to the manufacturer's instructions
only.
11
2
3
6
7
10
11
4
8
Werbung
Inhaltsverzeichnis
