Cleaning The Front Wheel; Cleaning The Side Brushes - Philips FC9910 Handbuch

Cleaning the front wheel

1 Push the latch hooks on either side of the front wheel retainer to
unlock them and lift the front wheel retainer off the appliance.
2 Remove dust and dirt from the brush strip on the retainer with the
comb end of the cleaning tool or with your fingers.
3 Remove the front wheel from the appliance and remove dust and
dirt from the wheel with the brush end of the cleaning tool.
4 Put the front wheel back into the appliance. Then place the front
wheel retainer over the front wheel and press it home until the latch
hooks lock into place with a click.

Cleaning the side brushes

1 To remove a side brush from the appliance, grab two arms of the
side brush and pull the side brush upwards with two hands.
2 Remove dust and dirt from the side brush with the comb end of the
cleaning tool or with your fingers.
3 Align the hole in the centre of the side brush with the half-round
mounting pin on the bottom of the robot vacuum cleaner and push
the side brush home.
Note: Make sure you assemble the side brush on the correct side. Assemble the
side brush marked with an L onto the pin marked with an L and the side brush
marked with an R onto the pin marked with an R.
4 Repeat steps 1 to 3 to clean the other side brush.
English
31