Makita 4340T Bedienungsanleitung Seite 4

ENGLISH
1-1. Cutting action changing lever
2-1. Switch trigger
2-2. Lock button
3-1. Speed adjusting dial
4-1. Tool opener
5-1. Blade clamp
5-2. Jig saw blade
5-3. Protrusions
6-1. Jig saw blade
7-1. Base
7-2. Hex wrench
8-1. Cutting line
8-2. Base
10-1. Base
10-2. Bolt
10-3. Hex wrench
SPECIFICATIONS
Length of stroke
Max. cutting capacities
Strokes per minute (min
* For European countries
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
Explanation of general view
11-1. Graduations
11-2. Bevel slot
11-3. Base
11-4. V-notch
11-5. Bolt
11-6. Gear housing
12-1. Base
12-2. Bolt
12-3. Hex wrench
13-1. Starting hole
16-1. Dust nozzle
16-2. Base
18-1. Dust nozzle
18-2. Hose for vacuum cleaner
19-1. Rip fence
20-1. Bolt
Model
Wood
Steel
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
4340T
26 mm
135 mm (* 110 mm)
10 mm
2,800
236 mm
2.4 kg
END201-2
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise and Vibration
its
The typical A-weighted sound pressure level is 85 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is 6 m/s
These values have been obtained according to
ENE019-1
EN60745.
4
20-2. Fence guide
20-3. Hex wrench
22-1. Fence guide
22-2. Threaded knob
22-3. Circular guide pin
24-1. Bolt
24-2. Rule bar
25-1. Guide rail adapter
25-2. Screw
25-3. Guide rail
26-1. Cover plate
26-2. Base
27-1. Base
27-2. Anti-splintering device
4340CT
26 mm
135 mm
10 mm
800 - 2,800
236 mm
2.4 kg
/II
Wear ear protection.
2
.
4340FCT
26 mm
135 mm
10 mm
800 - 2,800
236 mm
2.4 kg
ENF002-1
ENG004-2