Configurations For Typ=Sni - Siemens RCI 0601 Benutzerhandbuch

Connection of MX Multi-Channel Box to SISTORE MX and SISTORE MX Pro
9.4.1

Configurations for TYP=SNI

42
Siemens Building Technologies
Fire Safety & Security Products
cash dispenser type. The appropriate configurations for the individual types
(the example shows the settings for an SNI or SNI_DREBA cash dispenser)
are listed in the comments block „Hinweise für die Einstellungen" at the
end of the .ini file.
Example:
[SSx]
TYP=
FORMAT=9600,N,8,1
STATUS_ANF=~00
STATUS_ANT=STX,11111111000000,ETX
QUITT=STX,ACK,ETX
KAMERA=
ZEITSYNC_COMNR=1
BILDANZAHL_PRO_STEP=1
The following parameters define the delay in seconds between the arrival of
the telegram and the start of the recording; VZ_BILD_BILD is active if several
pictures of a single camera or one picture each of different cameras are to be
recorded.
VZ_PERSON=0
VZ_GELD=0
VZ_RAUM=0
VZ_BILD_BILD=1
4. Further type-dependent configurations are described in the following sections.
SNI_PORTRAET=1
SNI_RAUM=1
// here you can define whether the CDM will
be time-synchronized with the SISTORE MX;
if "0" is entered, there will be no
synchronization
// here you can define the number of pictures
to be recorded per telegram if only one
camera is defined for KAMERA= (default
value = 1)
// here you can define the number of telegrams after which a portrait
picture is taken
// here you can define the number of telegrams after which a picture of the
room is taken
06.2006