Startup; User Guide; Power Boost - Wallbox COPPER SB Installationsanleitung

Step 6.5: Enter in
the System menu in
the top right corner.

Startup

Once the assembly process has been completed your Wallbox Copper SB is ready to be used.
However, please review the information below in detail before beginningto operate your Wallbox
Copper SB:
• Do not use your Wallbox Copper SB for purposes not described in the section Product Description.
• Never open the cover of your charger when it is connected to the power supply.
• Special precautions must be taken with electronic implants. Please contact your medical device
manufacturer to find out the potential effects that the charging process may cause to it.
• Review and confirm all the steps that have been carried out.

User Guide

Follow the User Guide to begin setting up your Wallbox.
• Available at https://wallbox.com
Power Sharing Smart
If your charger is going to be part of a Power Sharing Smart infrastructure, please be sure you have
the instructions to perform this installation. In case of any doubt contact your sales agent.

Power Boost

If your charger is going to be part of a Power Boost, please be sure you have the instructions to
perform this installation. In case of any doubt contact your sales agent.
Step 6.6: Enter
in the Installation
Options menu.
Step 6.7: Enable the
IT network button.
13