Operation; Stand Alone Operation - EuroLite LED PSU-24V/10 DC Bedienungsanleitung

Controller for led pixel tubes

Vorschau ausblenden Andere Handbücher für LED PSU-24V/10 DC:

Inhaltsverzeichnis

Verfügbare Sprachen

OPERATION

After connecting the device to the mains, it starts running. Switch it on with the power switch. This unit has

two operating modes: it can be run as a stand-alone unit without external control or via a DMX controller.

In the Stand Alone mode, the LED PSU-24V DC can be used without DMX controller.

Browse through the menu by pressing the Mode button. Press the Setup button in order to select the desired

submenu. You can change the selection by pressing the Up or Down buttons. You can leave every mode by

pressing the Mode-button.

Dimmer Mode

Here you can manually select the desired static color and its intensity.

Sound-active Mode

Here you can select from 24 internal programs.

Auto-run program Mode

Here you can select from 24 internal switching color and 24 fading color programs and also set the program

speed.

Static Color Select Mode

Here you can manually select the desired static color and strobe effect.

Other program select Mode

Here you can select the desired display on the control board or set the device to default,

DMX mode

CH5 is 5-channel mode; CH7 is 7-channel mode; CH32 is 32-channel mode; CH48 is 480-channel mode.

Please note: The controller can be operated with any lighting control software supporting the DMX512

protocol. For convenient control, the lighting control software MADRIX is recommended (see Technical

specification/Accessories).

See following graphic for setting details.

22/28

00065031, Version 1.1

Inhaltsverzeichnis