Safety Precautions - Peaktech 5035 Bedienungsanleitung

Safety precautions

This product complies with the requirements of the following European
Community Directives: 89/336/EC (Electromagnetic Compatibility)
amended by 93/68/EC (CE-Marking). Pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of
serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions are
exempt from any legal claims whatever.
* Do not operate the meter before the cabinet has been closed and
screwed safely.
* Check test leads and probes for faulty insulation or bare wires
before connection to the equipment.
* Comply with the warning labels and other info on the equipment.
* Keep the equipment dry.
* CAUTION! Repeated sharp flexing can break the thermocouple
leads. To prolong lead life, avoid sharp bends in the leads,
especially near the connector.
* Always start with the highest measuring range when measuring
unknown values.
* Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* To avoid electrical shock, do not use this instrument when voltages
at the measurement surface exceed 24V AC or DC.
* To avoid damage or
measurement in microwaves ovens.
* Allow the equipment to stabilize at room temperature before taking
up measurement (important for exact measurements).
burns, do not make temperature
-14-
Frisöre & Schön- Haare färben
heitssalons Haare legen und schneiden,
Make-up
Haare waschen, Kasse
Frisierraum, Waschplätze
Korridore, Gänge
Hotels, Theater Kassen
Veranstaltungs- Eingänge
hallen Büros, Restaurant, Toiletten
Veranstaltungsräume, Flure,
Treppenhäuser
Feuerleitern, Fluchtwege
Geschäfte, Kauf- Theken und Vitrinen, Aus-
häuser stellungsfenster
Verpackungsabteilung
Warte- u. Sitzräume, Kon-
ferenzsäle
Waschräume, Toiletten,
Treppenhäuser
Gebäude und Handwerksräume, Schneider-
Wohnhäuser werkstätten
Lesezimmer, Make-up-Räume,
Küchen
Küchen, Unterhaltungsräume,
Esszimmer
Schlafzimmer, Studierzimmer,
Treppenaufgänge, Umkleide-
zimmer, Toiletten, Korridore
5.4. Luftfeuchtigkeits- und Temperaturmessungen
1. Luftfeuchtigkeitsmessungen:
2. Bereichs-/Funktionswahlschalter in Stellung „%RH" schieben.
3. Luftfeuchtigkeit direkt am Gerät ablesen. Im Interesse genauer
Messwerte sollte sich die Messung über einige Minuten bis zu
einer stabilen Messwertanzeige erstrecken.
1500 ... 3000
700 ... 1500
300 ... 700
150 ... 300
70 ... 150
700 ... 1500
300 ... 700
150 ... 300
70 ... 150
30 ... 70
1500 ... 3000
700 ... 1500
300 ... 700
150 ... 300
700 ... 3000
300 ... 700
150 ... 300
30 ... 150
-11-